Characterization of Dust Storms to Hong Kong in April 1998

In April 1998, two intense dust storms were generated in CentralAsia and transported eastward across East Asia (15 and 19 April). This article presents the chemical characterization ofHong Kong (HK) aerosols during the dust storms. During the 15 Aprildust storm, hourly respiratory suspended particles (RSP)(particle diameter smaller than 10 m) concentrationsmonitored at 7 sites in Hong Kong reached the peak valuessynchronously between 9 and 11 a.m. on 17 April, in which thehighest concentration was 267 g m^-3. Analysis ofthe RSP samples showed that concentrations of crustalelements (Ba, Ca, Cd, Cr, Fe, Mg, K⁺) and anthropogenicspecies (As, Ni, Pb, Zn, NH₄ ⁺, NO₃ ^-,SO₄ ^2- and total carbon) were substantiallyenhanced. Enhancement of these species was more than afactor of 2 to 14 relative to the non dust period. The totalcarbon content was high, at 59 g m^-3 (notincluding carbonate), and the enrichment factors of Asand Pb on 17 April were 122 and 117, respectively. Thisimplied that anthropogenic materials together with mineraldust were transported to HK from Mainland China. Based onmaterial balance calculations, mineral dust contributed41% to the observed RSP mass on 17 April, which was 2 times thatof the nondust sample (22%). From the 5-day backwardtrajectory analysis, this storm was transported directlyfrom Northwest China to HK. However, there was nocorresponding observation for the 19 April dust stormaerosol. Consequently, 15 April storm had stronger impact onHK's atmosphere than 19 April storm. Compared to the HK AirQuality Objective, 15 April dust storm did not cause seriousair pollution in HK.     

Predicting mass rapid transit noise levels on an elevated station

This study developed a noise prediction model for elevated mass rapid transit (MRT) platforms. Relevant physical and operational parameters (e.g. cruise speed, acceleration and deceleration rates for trains, building fa?ade setbacks and so on) were collected from the Bangkok mass transit system (BTS), the first elevated MRT system operated in Bangkok, Thailand. The equivalent continuous sound pressure levels (L(Aeq)) were collected from both sides of the MRT stations at the center of each platform. The relevant parameters were collected on both platforms and ground level, on both sides of MRT stations. These parameters were statistically tested to determine their correlation with MRT noise. The final model was built from highly correlated parameters using multiple regression analysis with a stepwise regression technique. Statistical evaluation showed a high degree of goodness-of-fit test for the model to the observed data. Therefore, it can be efficiently used for the projection of MRT noise in the affected areas.     

Geographic Analysis of Forest Health Indicators Using Spatial Scan Statistics

Geographically explicit analysis tools are needed to assess forest health indicators that are measured over large regions. Spatial scan statistics can be used to detect spatial or spatiotemporal clusters of forests representing hotspots of extreme indicator values. This paper demonstrates the approach through analyses of forest fragmentation indicators in the southeastern United States and insect and pathogen indicators in the Pacific Northwest United States. The scan statistic detected four spatial clusters of fragmented forest including a hotspot in the Piedmont and Coastal Plain region. Three recurring clusters of insect and pathogen occurrence were found in the Pacific Northwest. Spatial scan statistics are a powerful new tool that can be used to identify potential forest health problems.     

Landform Classification for Land Use Planning in Developed Areas: An Example in Segovia Province (Central Spain)

Landform-based physiographic maps, also called land systems inventories, have been widely and successfully used in undeveloped/rural areas in several locations, such as Australia, the western United States, Canada, and the British ex-colonies. This paper presents a case study of their application in a developed semi-urban/suburban area (Segovia, Spain) for land use planning purposes. The paper focuses in the information transfer process, showing how land use decision-makers, such as governments, planners, town managers, etc., can use the information developed from these maps to assist them. The paper also addresses several issues important to the development and use of this information, such as the goals of modern physiography, the types of landform-based mapping products, the problem of data management in developed areas, and the distinctions among data, interpretations, and decisions.     

A VSA-Based Strategy for Placing Conservation Buffers in Agricultural Watersheds

Conservation buffers have the potential to reduce agricultural nonpoint source pollution and improve terrestrial wildlife habitat, landscape biodiversity, flood control, recreation, and aesthetics. Conservation buffers, streamside areas and riparian wetlands are being used or have been proposed to control agricultural nonpoint source pollution. This paper proposes an innovative strategy for placing conservation buffers based on the variable source area (VSA) hydrology. VSAs are small, variable but predictable portion of a watershed that regularly contributes to runoff generation. The VSA-based strategy involves the following three steps: first, identifying VSAs in landscapes based on natural characteristics such as hydrology, land use/cover, topography and soils; second, targeting areas within VSAs for conservation buffers; third, refining the size and location of conservation buffers based on other factors such as weather, environmental objectives, available funding and other best management practices. Building conservation buffers in VSAs allows agricultural runoff to more uniformly enter buffers and stay there longer, which increases the buffers capacity to remove sediments and nutrients. A field-scale example is presented to demonstrate the effectiveness and cost-effectiveness of the within-VSA conservation buffer scenario relative to a typical edge-of-field buffer scenario. The results enhance the understanding of hydrological processes and interactions between agricultural lands and conservation buffers in agricultural landscapes, and provide practical guidance for land resource managers and conservationists who use conservation buffers to improve water quality and amenity values of agricultural landscape.     

Assessing Biological Integrity Using Freshwater Fish and Decapod Habitat Selection Functions

Comparison between the number of taxa observed and the number expected in the absence of human impact is an easily understood and ecologically meaningful measure of biological integrity. This approach has been successfully applied to the assessment of the biological quality of flowing water sites using macroinvertebrates with the river invertebrate and classification system (RIVPACS) and its derivatives. In this paper, we develop a method similar to the RIVPACS predictive model approach to assess biological integrity at flowing-water sites using freshwater fish and decapod assemblages. We extend the RIVPACS approach by avoiding the biotic classification step and model each of the individual species separately. These assemblages were sampled at 118 least impacted (reference) sites in the Auckland region, New Zealand. Individual discriminant models based on the presence or absence of the 12 most common fish and decapod species were developed. Using the models, predictions were made using environmental measures at new sites to yield the probability of the capture of each of the 12 species, and these were combined to predict the assemblage expected at sites. The expected assemblage was compared to that observed using an observed over expected ratio (O/E). The models were evaluated using a number of internal tests including jackknifing, data partitioning, and the degree to which O/E values differed between reference sites and a set of sites perceived to be impaired by human impacts.     

The economics of landmine clearance in Afghanistan

This paper presents an economic evaluation of landmine clearance in Afghanistan. The main benefits comprise increased agricultural output, saved transport time and running costs, saved human casualties and the saved costs of supporting refugees and displaced persons. An investment of US$100 million between 1988 and 1998 is estimated to provide annual benefits of $50.3 million per annum between 1999 and 2008. This translates into net present values of between $935 and $1,744 million, depending on the rate of discount used. This contrasts with the negative NPVs estimated for several other countries.     

建筑装璜中几种常用板材热解特性及动力学研究

对建筑装璜中几种常用板材变工况的热解行为进行了热重分析（TG）和差分热重分析（DTG）研究。通过对TG和DTG曲线的分析,深入研究了影响样品热解过程的几个重要因素：升温速率、样品粒径和试样量对热解过程的影响,通过对十种模型的比较,发现热解过程符合两阶段一级反应模型。并得出了各阶段的动力学参数、表观活化能和频率因子。     

Detecting Changes in Natural Resources Using Land Condition Trend Analysis Data

The Land Condition Trend Analysis (LCTA) program is the US Army's standard for land inventory and monitoring, employing standardized methods of natural resources data collection, analyses, and reporting designed to meet multiple goals and objectives. Critical to using LCTA data in natural resources management decisions is the ability of the LCTA protocols to detect changes in natural resources. To quantify the ability of LCTA protocols to detect resource changes, power analysis techniques were used to estimate minimum detectable effect sizes (MDES) for selected primary and secondary management variables for three Army installations. MDES for a subset of primary variables were estimated using data from 27 installation LCTA programs. MDES for primary and secondary variables varied widely. However, LCTA programs implemented at larger installations with lower sampling intensities detected changes in installation resources as well as programs implemented at smaller more intensively sampled installations. As a national monitoring program that is implemented at individual installations, LCTA protocols provide relatively consistent monitoring data to detect changes in resources despite diverse resource characteristics and implementation constraints.